Stucco Work

Artguyvince Inc. specializes in acrylic stucco (EFIS) which consist of a moister membrane, (usually a double layer of construction paper.) Then a layer of foam that is mechanically fastened to the wall or add hired to the wall depending on the sheathing used. The foam can range from 1” to 5” thick. Industry standards are 1.5” x 2’ x 4’. The foam is then coated with a two part Polly basecoat that is applied to the foam and a fiberglass mesh is embedded in the basecoat to give the EFIS its strength. It is now ready for an acrylic finish coat that can be matched to any paint swatch out there.

Here are some samples of my work with the addresses for your convenience. I hope you like what you see, and if there are any questions I would love to here from you.

Sort gallery by:
View:
1 St. SW - Back Side
1 St. SW - Back Side
7 km. east of Airdrie on exit 567
7 km. east of Airdrie on exit 567
17 Ave, Lower Springbank Rd. SW
17 Ave, Lower Springbank Rd. SW
50 Spring Valley Pl. SW
50 Spring Valley Pl. SW
87 Wildwood Dr. SW
87 Wildwood Dr. SW
89 Woodland Estates Dr., Bearspaw
89 Woodland Estates Dr., Bearspaw
121 Spring Valley Way SW
121 Spring Valley Way SW
156 Doverglen Cr. SE
156 Doverglen Cr. SE
222 29 Ave NW
222 29 Ave NW
332 Grove Hill Rd.
332 Grove Hill Rd.
2448 28 Ave. SW
2448 28 Ave. SW
5019-21a St. SW
5019-21a St. SW
Vince Vandurme is a native Calgarian self taught artist who is very versitile and comfortable in many mediums. When Vince is not painting you can find him tending to Bonsai Trees and Orchids.
Contact Information 403.703.1579
artguyvince@telus.net
Location Calgary, Alberta
Canada

© 2011 Art Guy Vince. All Rights Reserved.

Web Masters. Scapes. www.scapes.ca