Stucco Work

Artguyvince Inc. specializes in acrylic stucco (EFIS) which consist of a moister membrane, (usually a double layer of construction paper.) Then a layer of foam that is mechanically fastened to the wall or add hired to the wall depending on the sheathing used. The foam can range from 1” to 5” thick. Industry standards are 1.5” x 2’ x 4’. The foam is then coated with a two part Polly basecoat that is applied to the foam and a fiberglass mesh is embedded in the basecoat to give the EFIS its strength. It is now ready for an acrylic finish coat that can be matched to any paint swatch out there.

Here are some samples of my work with the addresses for your convenience. I hope you like what you see, and if there are any questions I would love to here from you.

Sort gallery by:
View:
Columns Under Decks
Columns Under Decks
1 St. SW - Back Side
1 St. SW - Back Side
7 km. east of Airdrie on exit 567
7 km. east of Airdrie on exit 567
17 Ave, Lower Springbank Rd. SW
17 Ave, Lower Springbank Rd. SW
45 Ave & 15 St. SW
45 Ave & 15 St. SW
49 Country Lane Way
49 Country Lane Way
50 Spring Valley Pl. SW
50 Spring Valley Pl. SW
83 Bearspaw Meadows NW
83 Bearspaw Meadows NW
87 Wildwood Dr. SW
87 Wildwood Dr. SW
89 Woodland Estates Dr., Bearspaw
89 Woodland Estates Dr., Bearspaw
119 Spring Valley Way SW
119 Spring Valley Way SW
121 Spring Valley Way SW
121 Spring Valley Way SW
Vince Vandurme is a native Calgarian self taught artist who is very versitile and comfortable in many mediums. When Vince is not painting you can find him tending to Bonsai Trees and Orchids.
Contact Information 403.703.1579
artguyvince@telus.net
Location Calgary, Alberta
Canada

© 2011 Art Guy Vince. All Rights Reserved.

Web Masters. Scapes. www.scapes.ca